SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
KENNAMETAL
HERTEL
H08700619
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700619
€4.72
Price with VAT:
€5.62
KENNAMETAL
HERTEL
H00481556
SCREW FOR INDEXABLES :FOR USE WITH ANVILS (MOQ=5, PKG QTY=1)H00481556
€2.52
Price with VAT:
€3.00
KENNAMETAL
HERTEL
G837600
EXTENSION TAP, SPIRAL POINT TAP TYPE, 3/8-16 INCH THREAD SIZE, UNC THREAD STANDARD, H3 THREAD LIMIT, RIGHT HAND THREAD DIRECTION, 6 INCH OVERALL LENGTH, HIGH-SPEED STEEL, REDUCED SHANK, 3 FL ...
€45.67
Price with VAT:
€54.34
KENNAMETAL
HERTEL
ETS 4-40
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)ETS 4-40
€8.06
Price with VAT:
€9.59
KENNAMETAL
HERTEL
E5249024
3/8" DIAM, 1" LOC, 2 FLUTE SOLID CARBIDE BALL END MILL UNCOATED, SINGLE END, 2-1/2" OAL, 3/8" SHANK DIAME5249024
€25.07
Price with VAT:
€29.83
KENNAMETAL
HERTEL
H08700502
SCREWS FOR INDEXABLE THREADING FOR USE WITH ANVILSH08700502
€2.01
Price with VAT:
€2.39
KENNAMETAL
HERTEL
H08700403
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700403
€4.31
Price with VAT:
€5.13
KENNAMETAL
HERTEL
CH-FW-120
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.9720 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.5100 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
€10.74
Price with VAT:
€12.79
KENNAMETAL
HERTEL
CH-FC-121017
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M12, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M12, THREAD SIZE, M12X1.75, THREAD SIZE, M12X1.75, MA ...
€2.50
Price with VAT:
€2.97
KENNAMETAL
HERTEL
CH-FC-053508 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP; TYPE: CAP; FOR SPINDLE DIAMETER (MM): M5; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M5; THREAD SIZE: M5 X 0.8; THREAD SIZE: M5 X 0.8; MATE ...
€4.77
Price with VAT:
€5.67
KENNAMETAL
HERTEL
CH-20752-B
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 165 LB CAPACITY, U-BAR, FLANGED BASE 76 ° HANDLE MOVEMENT, 94 ° BAR OPENING, STEELCH-20752-B
€9.85
Price with VAT:
€11.72
KENNAMETAL
HERTEL
CH-201
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 60 LB CAPACITY, U-BAR, FLANGED BASE 80 HANDLE MOVEMENT, 90 BAR OPENING, STEEL
€7.52
Price with VAT:
€8.95
KENNAMETAL
HERTEL
CH-10247
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 992 LB CAPACITY, U-BAR, FLANGED BASE 62 HANDLE MOVEMENT, 100 BAR OPENING, STEEL
€27.13
Price with VAT:
€32.29
KENNAMETAL
HERTEL
CH-SA-38300
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 3/8 ; THREAD SIZE: 3/8-16 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 3 ...
€5.91
Price with VAT:
€7.03
KENNAMETAL
HERTEL
CH-SA-08034-T2
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
€0.65
Price with VAT:
€0.77
KENNAMETAL
HERTEL
CH-FW-100
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; MATERIAL: CARBON STEEL ; MATERIAL: CARBON STEEL ; HOLE DIAMETER (DECIMAL INCH): 0.1650 ; HOLE DIAMETER (MM): 0.1650 ; HOLE DIAMETER: 0.1650 ; FINIS ...
€0.34
Price with VAT:
€0.41
KENNAMETAL
HERTEL
CH-36010
STANDARD STRAIGHT LINE ACTION CLAMP, 800 LB LOAD CAPACITY, 1.6063" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.3438" HOLE, 0.614" PLUNGER DIA, STRAIGHT HANDLECH-36010
€26.86
Price with VAT:
€31.97
KENNAMETAL
HERTEL
CH-301-B
STANDARD STRAIGHT LINE ACTION CLAMP, 100 LB LOAD CAPACITY, 0.6575" PLUNGER TRAVEL, FLANGED BASE, STEEL 3 MOUNTING HOLE, 0.172" HOLE, 0.252" PLUNGER DIA, STRAIGHT HANDLECH-301-B
€12.54
Price with VAT:
€14.92
KENNAMETAL
HERTEL
CH-201-A
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 60 LB CAPACITY, SOLID BAR, FLANGED BASE 80 ° HANDLE MOVEMENT, 90 ° BAR OPENING, STEELCH-201-A
€7.52
Price with VAT:
€8.95
KENNAMETAL
HERTEL
CH-13007
MANUAL HOLD-DOWN TOGGLE CLAMPS, U-BAR, FLANGED, CLOSED, HOLDING CAPACITY (N) 1472.35, 331 LB, 150.14 KGCH-13007
€17.01
Price with VAT:
€20.24
KENNAMETAL
HERTEL
CH-FW-080
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.3260 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.1690 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
€0.52
Price with VAT:
€0.62
KENNAMETAL
HERTEL
CH-FC-064410
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M6, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M6, THREAD SIZE, M6 X 1.0, THREAD SIZE, M6 X 1.0, MATE ...
€4.16
Price with VAT:
€4.95
KENNAMETAL
HERTEL
CH-D317
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 375 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 185 ° BAR OPENING, STEELCH-D317
€24.18
Price with VAT:
€28.77
KENNAMETAL
HERTEL
CH-D217-U
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 200 LB CAPACITY, U-BAR, FLANGED BASE 61 ° HANDLE MOVEMENT, 91 ° BAR OPENING, STEELCH-D217-U
€15.22
Price with VAT:
€18.11
KENNAMETAL
HERTEL
CH-FW-516
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; MATERIAL: CARBON STEEL ; MATERIAL: CARBON STEEL ; HOLE DIAMETER (DECIMAL INCH): 0.3220 ; HOLE DIAMETER (MM): 0.3220 ; HOLE DIAMETER: 0.3220 ; FINIS ...
€0.30
Price with VAT:
€0.35
KENNAMETAL
HERTEL
CH-FW-380
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.7500 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.4000 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
€0.37
Price with VAT:
€0.44
KENNAMETAL
HERTEL
CH-36202
STANDARD STRAIGHT LINE ACTION CLAMP, 200 LB LOAD CAPACITY, 0.7874" PLUNGER TRAVEL, STEEL 0.37" PLUNGER DIA, STRAIGHT HANDLECH-36202
€16.12
Price with VAT:
€19.18
KENNAMETAL
HERTEL
CH-D237-U
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 750 LB CAPACITY, U-BAR, FLANGED BASE 59 ° HANDLE MOVEMENT, 93 ° BAR OPENING, STEELCH-D237-U
€25.97
Price with VAT:
€30.90
KENNAMETAL
HERTEL
CH-D202-UL
MANUAL HOLD-DOWN TOGGLE CLAMP, HANDLE ORIENTATION: VERTICAL, BAR STYLE: U-BAR, BASE STYLE: FLANGED, BAR END TYPE: CLOSED, HOLDING CAPACITY: 90.72 KG, 65 DEGREE HANDLE MOVEMENT
€12.54
Price with VAT:
€14.92
KENNAMETAL
HERTEL
CH-40323
PULL-ACTION LATCH CLAMP, HORIZONTAL, 360 LB, U-HOOK, FLANGED BASE 1.18" DRAWING MOVEMENT, 3.07" OAL, STRAIGHT HANDLE, STEELCH-40323
€13.43
Price with VAT:
€15.98
KENNAMETAL
HERTEL
CH-36224
STANDARD STRAIGHT LINE ACTION CLAMP, 700 LB LOAD CAPACITY, 2.5787" PLUNGER TRAVEL, STEEL 0.618" PLUNGER DIA, STRAIGHT HANDLECH-36224
€34.02
Price with VAT:
€40.49
KENNAMETAL
HERTEL
CH-13005
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 150 LB CAPACITY, U-BAR, FLANGED BASE 170 ° HANDLE MOVEMENT, 90 ° BAR OPENING, STEELCH-13005
€10.74
Price with VAT:
€12.79
KENNAMETAL
HERTEL
CH-101-A
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 110 LB CAPACITY, U-BAR, FLANGED BASE 56 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-101-A
€9.85
Price with VAT:
€11.72
KENNAMETAL
HERTEL
8000199
HEX SOCKET CLAMPING SCREW FOR INDEXABLES CLAMP SCREW COMPATIBLE
€4.44
Price with VAT:
€5.28
KENNAMETAL
HERTEL
8000179
1/2" INSCRIBED CIRCLE, TRIGON EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IWSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000179
€24.18
Price with VAT:
€28.77
KENNAMETAL
HERTEL
8000173
3/8" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ITSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
€17.91
Price with VAT:
€21.31
KENNAMETAL
HERTEL
8000167
5/8" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IRSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
€22.38
Price with VAT:
€26.64
KENNAMETAL
HERTEL
8000160
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, POSITIVE RAKE, NEUTRAL CUT8000160
€32.23
Price with VAT:
€38.36
KENNAMETAL
HERTEL
8000159
3/8" INSCRIBED CIRCLE, TRIGON EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, IWSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000159
€23.28
Price with VAT:
€27.70
KENNAMETAL
HERTEL
8000158
HEX SOCKET SHIM SCREW FOR INDEXABLES SHIM SCREW COMPATIBLE
€5.91
Price with VAT:
€7.03
KENNAMETAL
HERTEL
8000192
1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
€51.04
Price with VAT:
€60.73
KENNAMETAL
HERTEL
8000165
3/8" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IRSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000165
€20.59
Price with VAT:
€24.51
KENNAMETAL
HERTEL
8000184
3/8" INSCRIBED CIRCLE, TRIGON EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SKWP SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
€25.07
Price with VAT:
€29.83
KENNAMETAL
HERTEL
8000177
3/8" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, IVSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
€25.97
Price with VAT:
€30.90
KENNAMETAL
HERTEL
8000172
3/8" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, ITSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
€17.91
Price with VAT:
€21.31
KENNAMETAL
2269973
COLLET SET: 12 PC, SERIES ER32, 1/8 TO 13/16" CAPACITY, (MOQ=1, PKG QTY=1)2269973
€402.93
Price with VAT:
€479.48
KENNAMETAL
2407088
BT40 TAPER, 0.76 INCH MAX WRENCH, RETENTION KNOB SOCKET, (MOQ=1, PKG QTY=1)2407088
€112.82
Price with VAT:
€134.25
KENNAMETAL
2018679
INSERT SCREW FOR INDEXABLES: T8 TORX, (MOQ=1, PKG QTY=1)
€7.52
Price with VAT:
€8.95
